碘化钾-乙基紫-水体系固相浮选分离镉的研究

研究了碘化钾 乙基紫 水体系固相浮选分离镉的行为及与常见金属离子分离的最佳条件。试验表明,将碘化钾溶液、乙基紫溶液和盐酸溶液混合稀释,生成稳定的CdI2-4·(EV+)2三元缔合物可很快浮于水相,使Cd(Ⅱ)被定量浮选。控制适当条件,可实现Cd(Ⅱ)与常见金属离子Mn(Ⅱ)、Al(Ⅲ)、Ni(Ⅱ)、Zn(Ⅱ)之间的分离。对合成水样进行了浮选分离测定,结果满意。     

Tribromoisocyanuric Acid (TBCA) and Oxone®‐MX Systems as Oxidizing Agents: Oxidative Coupling of Thiols to Their Corresponding Disulfides under Mild and Heterogeneous Conditions

Tribromoisocyanuric acid (TBCA) and Oxone^®‐MX systems were used as effective oxidizing agents for the oxidation of thiols to their corresponding disulfides under mild conditions at room temperature with good to excellent yields.     

Flow injection system for hydrolysable tannin determination

A flow injection system was proposed to evaluate the transient product of a colorimetric reaction between hydrolysable tannin and potassium iodate (KIO₃) solution. The system optimization was accomplished by using statistical methods based on experimental design. Flow rate of KIO₃ solution, sample volume, carrier flow rate, and reaction coil were the selected factors for evaluation. On screening step, complete factorial 2⁴ was used and two levels for each selected factor were studied. For the optimization phase, a centered face composite design 2² + star was employed to evaluate sample volume and flow rate of KIO₃ solution, which were the factors identified in the screening phase as having more influence on the absorbance signal. After optimization, the proposed system was compared with batch determination. Some characteristics, such as analytical frequency, reagent consumption and chemical residues generation presented better results by the use of the proposed system if compared with batch method. The system presented good repeatability with standard deviation lower than 3%, for n = 10, linearity (R² = 0.9974) for tannic acid standard, analytical frequency of 15 injections h^− 1 and limit of quantification of 24 mg L^− 1 of tannic acid. Good results were obtained when the proposed system was applied to hydrolysable tannin determination in Stryphnodendron barbatimão, Eucalyptus citriodora and Phyllanthus niruri, samples of plants commonly used in popular medicine.     

Preparation and Crystal Structure of Potassium Iron Hydrogen Phosphate,KFe3(HPO4)2(H2PO4)6 · 4 H2O

Single crystals of potassium iron hydrogen phosphate, KFe₃(HPO₄)₂(H₂PO₄)₆ · 4 H₂O, were prepared hydrothermally by heating a mixture of Fe₂O₃, H₃PO₄ and K₂CO₃ with a small amount of water. It crystallizes monoclinic, space group C2/c (N° 15 Int. Tab.) with Z = 4 and a = 1701(2), b = 960.4(5), c = 1750(1) pm, β = 90.88(7)°. The crystal structure was solved by using 1716 unique reflections F₀ > 4σ(F₀) with a final wR2 value of 0.126 (SHELXL-93). The main feature of the crystal structure are layers formed by PO₄-tetrahedra around the FeO₆-octahedra parallel to (001). K⁺ and H₂O molecules connect these layers. Effective Coordination Numbers (ECoN), Mean Fictive Ionic Radii (MEFIR), Charge Distribution (CHARDI) and the Madelung Part of Lattice Energy (MAPLE) are calculated for the title compound. The existence of hydrogen bonds is confirmed by these calculations.     

A convenient and regioselective oxidative bromination of electron-rich aromatic rings using potassium bromide and benzyltriphenylphosphonium peroxymonosulfate under nearly neutral reaction conditions

Regioselective oxidative bromination of electron-rich aromatic rings has been studied using potassium bromide as a bromine source in the presence of benzyltriphenylphosphonium peroxymonosulfate as oxidant under nearly neutral reaction conditions. In most cases we obtained monobrominated derivatives regioselectively and in good to high yields without the aid of strong acids.     

不同介质凝胶体系中草酸钙结晶的研究

研究了五种不同介质（水、氯化钠、合成尿、正常人尿液和尿石患者尿液）的凝胶体系中草酸钙（CaC2O4）晶体的生长,及各种体系中防石药物柠檬酸钾（K3cit）对CaC2O4生长的影响.没有加K3cit时,CaC2O4晶体以一水草酸钙（calcium oxalate monohydrate, COM）为主要物相,但在氯化钠和合成尿的凝胶体系中同时出现了二水草酸钙（calcium oxalate dihydrate, COD）和三水草酸钙（calcium oxalate trihydrate, COT）,肾结石患者尿液中出现COD,而正常人尿液中没有COD和COT生成.加入K3cit后,水、氯化钠和合成尿介质的凝胶体系中,COT的含量显著增加,患者尿液中产生大量COD,而正常人尿液中出现了少量的COD和极个别的COT.COT的增加与低温、体系中高的离子强度及金属离子等因素有关.K3cit具有诱导COD和COT的生成、减小COM晶体比表面积的作用,从而有利于防治草酸钙结石的形成.     

NaCl(或KCl)-CH3OH-H2O体系的摩尔电导

CHaOH－HzO体系具有非常特殊的性质，同时在工业生产及临床治疗方面有着十分广泛的应用，文献中有大量地从不同角度就这类体系进行研究的报道．然而，就N3CI及KCI－CH30H－H20体系的电导研究而言，文献中仅有关干KCI－CH30H－H20（间隔20％CH30H）的部分研究工作．作为全面、系     

偶联剂对钛酸钾晶须/双马来酰亚胺树脂摩擦磨损性能的影响

研究了不同偶联剂及钛酸钾晶须添加量对钛酸钾晶须 /双马来酰亚胺树脂复合材料的摩擦磨损性能的影响 .结果发现 ,钛酸钾晶须能明显提高复合材料的耐磨性 ,晶须的加入使材料的磨损率得到显著降低 ;钛酸钾晶须对材料具有一定的润滑性 ,添加晶须后材料的摩擦系数与树脂基体基本相当 ;偶联剂对复合材料的摩擦系数影响不大 ,但是合适的偶联剂对材料耐磨性的提高则具有明显的作用 .晶须添加量较低时 ,复合材料的磨损机理主要为较严重的粘着磨损 ,晶须添加量较高时 ,疲劳磨损占主导地位 .     

Flow injection analysis of potassium using an all-solid-state potassium-selective electrode as a detector

The concentration of potassium was determined by a combination of flow injection analysis (FIA) with an all-solid-state potassium sensor detection. The all-solid-state potassium-selective electrode possessing long-term potential stability was fabricated by coating an electroactive polypyrrole/poly(4-styrenesulfonate) film electrode with a plasticized poly(vinyl chloride) membrane containing valinomycin. The simple FIA system developed in this laboratory demonstrated sensitivity identical to that in the batch system and achieved considerably rapid assay (150 samples h⁻¹). Analyses of soy sauce and control serum samples by this FIA system yielded results in good agreement with those obtained by conventional measurements.     

Kinetic spectrophotometric methods for the determination of dothiepin hydrochloride in bulk and in drug formulation

Two simple and sensitive kinetic methods for the determination of dothiepin hydrochloride are described. The first method is based on kinetic investigation of the oxidation reaction of the drug with alkaline potassium permanganate at room temperature for a fixed time of 25 min. The absorbance of the colored manganate ions is measured at 610 nm. The second method is based on the reaction of dothiepin hydrochloride with 4-chloro-7-nitrobenzofurazan (NBD-Cl) in the presence of 0.1 mol L^–1 sodium bicarbonate. Spectrophotometric measurement was achieved by recording the absorbance at 470 nm for a fixed time of 60 min. All variables affecting the development of the color were investigated and the conditions were optimized. Plots of absorbance against concentration in both procedures were rectilinear over the ranges 4–24 and 50–250 g mL^–1, with mean recoveries 99.33±0.42 and 99.88±0.53, respectively. The proposed methods were successfully applied for the determination of dothiepin hydrochloride in bulk powder and in capsule dosage form. The results obtained were found to agree statistically with those given by the non-aqueous B.P. method. Furthermore the methods were validated according to USP guidelines and also assessed by applying the standard addition technique. The determination of dothiepin hydrochloride by the fixed concentration method is feasible with the calibration equations obtained, but the fixed time method proves to be more applicable.